Conventional electromagnetic flowmeter

EF611-13 intelligent electromagnetic flowmeter is a universal product,which has the characteristics of high precision, high reliability and wideapplication range. It can measure all kinds of water quality liquid and liquidwith sold particles. It is widely used in water supply，petrochemical.chemical.papermaking. pharmaceutical, food and beverage,steel,metallurgy, tobacoo, textile, power plant and other application fields.Thetheoretical service life can reach 20 years.

De-tails

High precision:

Electromagnetic flowmeter is a kind of volume flow meter,flows measurement is not affected by fluid density , wiscosity,temperature, preSSure and conductivity changes,sensorinduced woltage signal and the average flow rate of linearrelationship, high measurement aocuracy-

wide range of temperature measurement:

Split electromagnetic flowmeter can be used to measure-35℃-180℃ medium-

Selection is simple:

Only the lining and electrode of the sensor are in contactwsith the liquid under testAs long as the electrode andlining materials are reasonably selected , they can be

resistant to corrasion and wear and ensure ong-term use-

Capacitive touch key:

EF611-13 intelligent electromagnetic flowmeter converteruses capacitive switch, no need to open the cover can berealized to madify the instrument parameters, and effec-tively prevent misoperation-

High reliability:

Electromagnetic flowwmeter no mechanical inertia, sensitiveresponse , can measuire instantaneous pulsating flow, andgood linearity.Therefore, the measurement signal can bedirectly coniverted into a standard signal by a linear conwerter,wthich can be indicatecd locally or transmitted remotely-

Low requirements for straight pipe section:

Since the induced woltage signal is formed in the whole spacefilled with magnetic field and is the average value on the

pipeline section, the straight pipe segment required by thesensor is relatively short, generally the first 5D and then 3D.


STEM SE-ALING
ECOTROLO TRIMS 444
Standard parabolic plug

For laminar or turbulent flow, the single-stage, dirt-resistant parabolic plug is the best choice. In the case of globe control valves without pressure balancing and up to nominal size DN 100 (4″), the plug and stem are one-piece; for higher sizes, the design is two-part. As standard, the characteristic curve of the parabolic plugs is adjustable; the standard characteristics curves are linear and equal percentage. The valve sealing is metallic type with Class IV leakage (Class V as an option). In order to counteract the cavitation-related erosion phenomena occurring under high pressure conditions, parabolic plugs (single or multi-stage) and clamping seat can also be made of highly wear-resistant ceramic materials. Noise emissions can be reduced with a low-noise perforated cage.

ECOTROLO TRIMS111111
Standard parabolic plug

For laminar or turbulent flow, the single-stage, dirt-resistant parabolic plug is the best choice. In the case of globe control valves without pressure balancing and up to nominal size DN 100 (4″), the plug and stem are one-piece; for higher sizes, the design is two-part. As standard, the characteristic curve of the parabolic plugs is adjustable; the standard characteristics curves are linear and equal percentage. The valve sealing is metallic type with Class IV leakage (Class V as an option). In order to counteract the cavitation-related erosion phenomena occurring under high pressure conditions, parabolic plugs (single or multi-stage) and clamping seat can also be made of highly wear-resistant ceramic materials. Noise emissions can be reduced with a low-noise perforated cage.

ECOTROLO TRIMS2222
Standard parabolic plug

For laminar or turbulent flow, the single-stage, dirt-resistant parabolic plug is the best choice. In the case of globe control valves without pressure balancing and up to nominal size DN 100 (4″), the plug and stem are one-piece; for higher sizes, the design is two-part. As standard, the characteristic curve of the parabolic plugs is adjustable; the standard characteristics curves are linear and equal percentage. The valve sealing is metallic type with Class IV leakage (Class V as an option). In order to counteract the cavitation-related erosion phenomena occurring under high pressure conditions, parabolic plugs (single or multi-stage) and clamping seat can also be made of highly wear-resistant ceramic materials. Noise emissions can be reduced with a low-noise perforated cage.

ECOTROLO TRIMS 333
Standard parabolic plug

For laminar or turbulent flow, the single-stage, dirt-resistant parabolic plug is the best choice. In the case of globe control valves without pressure balancing and up to nominal size DN 100 (4″), the plug and stem are one-piece; for higher sizes, the design is two-part. As standard, the characteristic curve of the parabolic plugs is adjustable; the standard characteristics curves are linear and equal percentage. The valve sealing is metallic type with Class IV leakage (Class V as an option). In order to counteract the cavitation-related erosion phenomena occurring under high pressure conditions, parabolic plugs (single or multi-stage) and clamping seat can also be made of highly wear-resistant ceramic materials. Noise emissions can be reduced with a low-noise perforated cage.

ECOTROLO TRIMS 444
Standard parabolic plug

For laminar or turbulent flow, the single-stage, dirt-resistant parabolic plug is the best choice. In the case of globe control valves without pressure balancing and up to nominal size DN 100 (4″), the plug and stem are one-piece; for higher sizes, the design is two-part. As standard, the characteristic curve of the parabolic plugs is adjustable; the standard characteristics curves are linear and equal percentage. The valve sealing is metallic type with Class IV leakage (Class V as an option). In order to counteract the cavitation-related erosion phenomena occurring under high pressure conditions, parabolic plugs (single or multi-stage) and clamping seat can also be made of highly wear-resistant ceramic materials. Noise emissions can be reduced with a low-noise perforated cage.

ECOTROLO TRIMS111111
Standard parabolic plug

For laminar or turbulent flow, the single-stage, dirt-resistant parabolic plug is the best choice. In the case of globe control valves without pressure balancing and up to nominal size DN 100 (4″), the plug and stem are one-piece; for higher sizes, the design is two-part. As standard, the characteristic curve of the parabolic plugs is adjustable; the standard characteristics curves are linear and equal percentage. The valve sealing is metallic type with Class IV leakage (Class V as an option). In order to counteract the cavitation-related erosion phenomena occurring under high pressure conditions, parabolic plugs (single or multi-stage) and clamping seat can also be made of highly wear-resistant ceramic materials. Noise emissions can be reduced with a low-noise perforated cage.

HIGHLIGHTS
Compact and robust design
HIGHLIGHTS
Compact and robust design
HIGHLIGHTS
Compact and robust design
SI-MI-LAR PRO-DUC-TS
SUB­SCRI­BE TO THE NEWS­LET­TER
Register here
  • 51 Bridge Street, Kington, England, HR5 3DW
  • T: 400-765-1611
  • F:
  • E:

© 2025 VTON UNIVERSE TECHNOLOGY GROUP LIMITED